About the QC Interface

Quick-Change RF adapters are designed for use with high power testing and monitoring equipment used across a broad variety of commercial applications. The quick-change adapter interface (referred to as the “QC” end) allows two connectors to be quickly mounted onto a common interlink housing in any standard interface combination to match your test equipment and DUT. The common QC interface at the interlink housing ensures consistency of results. Quick-Change adapters represent a quick and easy way to match your tester and equipment without performance degrading adapters.


Diagram

QCtechnical diagram

click to enlarge

Specifications

Electrical

Nominal Impedence50 ohms ohms
Frequency RangeDC to 7 GHz
Voltage Rating2700 volts rms
Dielectric Withstanding
Voltage
4000 volts rms

Mechanical

Mating Characteristicsper TRU Standards
Connector Durability500 cycles min.
Recommended TorqueN/A (Flange Mounting)

Materials/Finishes

BodyBrass, Silver or Nickel Plated
Contacts (Inner)Female: Beryllium Copper, Silver or Gold Plated. Male: Brass, Silver or Gold Plated
Contacts (Outer)Brass, Silver or Nickel Plated
Contacts (Slotted)Beryllium Copper, Silver or Nickel Plated
InsulatedTeflon
Gaskets & SealsN/A

Environmental

Tempurature Range-85°F to +329°F (-65°C to +165°C)
VibrationMIL-STD-202 Configurations Available
ShockMIL-STD-202 Configurations Available
Moisture ResistanceMIL-STD-202 Configurations Available
Corrosion (salt spray)MIL-STD-202 Configurations Available

Download as Printable PDF

QC Performance Charts